Home > Cast Steel > DIN GS-C25

DIN GS-C25
2015-10-14 16:20:58   Source:www.hspecialsteel.com   Criticism:0 CTR:

This is ferrite refractory cast steel in Germany, we can produce plate, flat, belt, sheet, wire coil, square bar, round rod, pipe,forged valve body, forged rings, forged multidiameter shafts etc for this steel
Steel Grade  : DIN GS-C25
Material No. W-Nr : 1.0619
     
CHEMICAL COMPOSITION    
C(%) : 0.18~0.23
Si(%) : 0.30~0.60
Mn(%) : 0.50~0.80
P(%)≤ : 0.02
S(%)≤ : 0.015
Cr(%) : ≤0.30
Ni(%) :
Other(%) :
     
MECHANICAL PROPERTIES    
Yield Strength|σ0.2|20℃/Mpa : 245
Yield Strength|σ0.2|200℃/Mpa : 175
Yield Strength|σ0.2|300℃/Mpa : 145
Yield Strength|σ0.2|350℃/Mpa : 135
Yield Strength|σ0.2|400℃/Mpa : 130
Yield Strength|σ0.2|450℃/Mpa : 125
Yield Strength|σ0.2|500℃/Mpa :
Yield Strength|σ0.2|550℃/Mpa :
Tensile Strength|σb/MPa : 440~590
Extensibility|δ5(%)≥ : 22
Ballistic|Akv①>J : 27
     
     
Remark:    
①, This is average of three test samples, if it is single sample, it will be higher than 70% of average.
     
     
     

Related hot word search:DIN GS-C25

Prev:DIN G-NiCr28W
Next:DIN GS-22Mn4